HIGH TACK TURBO
Super strong adhesive that cures to form a strong, flexible,
unbreakable & highly resistant joint with excellent adhesion
A single component, moisture curing high viscosity elastomeric silane
terminated sealant with INCREDIBLE tackiness. It cures to form a strong and
highly flexible resistant joint with excellent adhesion on most substrates.
DYNA-FIX ® High Tack Turbo can be used indoor or outdoor and offers
excellent adhesion on common substrates such as glass, metals, prelacquered aluminum, PVC, plastic, wood, polyester , stone, concrete etc.
It is commonly used for bonding materials subjected to vibrations and
• 3 Second Bond
• No primer required
• Strong adhesion
• Indoor & Outdoor Use
• Excellent UV and aging resistance properties
• Good resistance to vibrations
• No shrinkage, sagging nor stringing
Surfaces must be clean, dry and free of grease,
dust, oil and any contaminant to ensure that the
bonding process is not compromised. Suitable
solvents such as methylethylketone, acetone etc.
may be used to clean surfaces
Apply strips 5 to 10 cm apart using either a
manual or a pneumatic gun.
No mechanical holding is required in general. For
heavier elements, mechanical holding may be
required before polymerization.
Once the cartridge is opened, the product should
be used within 24 hours otherwise, the product
Do not apply at temperatures below 5°C.
During curing, contact with non-cured
polyurethanes should be avoided.
18 months from date of production, when stored
at or below 25°C in the original unopened
Saber Silicone High Tack TurboID: 115029
سيليكون اصبع high tack
HIGH TACK TURBO
Based on 0 reviews
There are no reviews yet.
Be the first to review “Saber Silicone High Tack Turbo”